Thanks for using our YW11 GPS TRACKER,please read this guidance carefully before install our GPS tracker. 1. Features & Specifications 1.1 Features Geo-fence, power cut off alert, vibration alert, movement alert, real-time location, historical route playback etc. 1.2 Specifications ●GSM850/900/1800/1900MHz frequency ●Voltage: 12-92VDC; ●Warm Start: ≤2s (open sky) Cold Start: ≤32s (open sky) ●Accuracy: ≤30m ●Working Temp.: -20℃ ~ 55℃ Note: Please use the YW11 in voltage range above, to avoid burning or broken 2. Accessories & LED Status 2.1 Accessories: Standard: YW11 / Wire / User Manual / Sticker Option: Relay(6 RMB / 1 USD) 2.2 LED Status 2.2.1 Yellow LED (GSM Status) LED Status | Explanation | Slow Flashing | GSM Initializing | Quick Flashing | Can’t Identify SIM Card | Always On | GPRS Online and Working | Off | GSM Sleep / Battery Disconnected |
2.2.2 Blue LED (GPS Status) LED Status | Explanation | Slow Flashing | Searching GPS Signal | Quick Flashing | Can’t Get GPS Signal | Always On | GPS Working and Positioning | Off | GPS Sleep / Battery Disconnected |
3. Installation Guidance Please note below items when installing the YW11 tracker, and we suggest the professional car worker to do the installation work: a. Install the YW11 in a covert and waterproof place b. Avoid installing YW11 near by the radar, car alarm or other car communication tools c. Please make sure the GPS receiver (No sticker) side upon and no metal above it Installation Position: a. Below the car front windshield b. Near the car dashboard (please make sure the dashboard surface with no metal) c. Under the motorbike’s seat d. Under the motorbike’s petal e. Inside the motorbike’s headlight 5. SMS Command List Function | SMS Command | Response | Command Error | Update Interval | Set: FREQ,30# Query: FREQ# | Success! | No Response | Stop Engine | Set: RELAY,1# Query: RELAY# | Success! | No Response | Restore Engine | Set: RELAY,0# Query: RELAY# | Success! | No Response | APN Setting | 1. NAPN=cmnet,123,666 2. 2. NAPN=cmnet,, | Success! | No Response | Overspeed Setting | Set: SPEED,80# Query: SPEED# | Success! | No Response | Reboot | RESET# | Success! | No Response | Factory Restore | FACTORYALL# | Success! | No Response |
YW11
|